Pi+® (PiPlus®) 1PC PC 10 Port 4 Pin Fan Hub 10-Way 4-pin IDE Fan Speed

Par un écrivain mystérieux

Last updated 07 juin 2024

Pi+® (PiPlus®) 1PC PC 10 Port 4 Pin Fan Hub 10-Way 4-pin IDE Fan Speed

About the product: Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans. In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the

About the product:

Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans.
In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
For both 4-Pin and 3-Pin fans. Please note 4Pin fan speed can be adjusted by temperature control. 3Pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.
There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
RED is expected to be a pass through for the CPU fan. So, the hub has a power source fed from the computer power supply, then the speed is regulated by the speed for the source fan. You can connect to the CPU fan lead on the system board or the chassis fan lead. The ten fans will spin at the same speed, that designated by the system for that fan. If the chassis fan is configured in BIOS to run at 50%, you will have 10 fans at 50%.

Package content: 1 x 12V 10 way 4-pin ide fan governor, 1x PWM connecting cable.

Description:

Fan interface: IDE interface, support 3/4 pin
Product size: 7*4.6cm/2.7*in
Rated voltage: 12V
Product model: temperature control 4-pin hub
Scope of application: motherboard 4-pin interface
PWM cable length: 40cm/15.7in

Features:

7.PWM is connected to the motherboard FAN CPU interface through the PWM CONNECTION cable,
8. The red interface is the specific interface of the CPU fan, and the black interface is the standard PWM fan interface.
9. There is a double-sided EVA adhesive on the back, which can fix the hub in the computer case.

Note:

1. The red port must be plugged into a fan first. Pull one end of the PWM cable and plug it into the CPU_FAN interface on the motherboard.

Product Name: PC FAN PWM HUB. The main function: to expand the 10-channel 4-pin fan interface to solve the problem of insufficient number of

NOYITO 10-Channel PC Fan PWM HUB SATA Port Power Supply Maximum Support 10-Channel PWM Fan Temperature Control Suitable for Motherboard 3Pin 4Pin Fan

1 to 10 4 Pin PWM Cooler Fan HUB Splitter Extension PC Speed

Pi+® (PiPlus®) 1PC PC 10 Port 4 Pin Fan Hub 10-Way 4-pin IDE Fan Speed

SinLoon 4 Knob Cooling Fan Speed Controller PC 8

EnLabs PWMHUB10S 10 Ports 4-Pin PWM Fan Hub, SATA 15pin to 10 Fan

Adapters – Page 2 – Pi+® (PiPlus®)

10-Port PWM Fan Hub, Splitter for 4-Pin & 3-Pin Fans – EZDIY-FAB

NOYITO 10-Channel PC Fan PWM HUB SATA Port Power

Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans. In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal. For both 4-Pin and 3-Pin fans.